Top 5 Most Common Plumbing Problems and How to Solve Them
Are you looking to learn more about diy plumbing?
Whether you’re a homeowner or renting a space, plumbing problems can occur anytime. These problems can be a headache for even the most experienced plumbers. That’s why it’s important to learn to stay proactive so you can fix your plumbing problems before they become a headache.
We can help! Please keep reading for our must-know guide on the most common problems and how to fix them.
1. Clogged Drains
Clogged drains are one of the most common plumbing problems caused by a build-up of debris, such as hair, soap scum, food scraps, and other small objects. These blockages can lead to slow-running or even stopped drains.
To solve this issue, use a plunger on the drains, which can help remove the blockage. If this does not work, you use a plumbing snake to clear the blockage. Also, vinegar and baking soda solution can help remove blockages from drains by breaking down the organic material.
2. Running Toilets
Running toilets are due to either faulty fill or non-functioning flush valves. A faulty fill valve could be due to mineral build-up or corrosion. You need to remove the valve and clean or replace it to solve it.
If it’s a non-functioning flush valve, the tank will fill when flushing and the water run. To fix this, you need to replace the flapper and the tank ball or adjust the flush valve.
3. Faucet Leak
The most common causes of a dripping faucet are worn seals and O-rings, broken washers, or corroded valve seats. The repair is usually easy and involves replacing the old parts with new ones. It may be necessary to tighten any pipes causing the leakage for the repair to be successful.
4. Lack of Hot Water
Water heater problems are usually due to a broken water heater and clogged hot water lines. Check the water heater to make sure it is functioning properly. If it is, the next step is to inspect and clean the hot water lines. If not, then you can
Clogged hot water lines can block or reduce the flow of hot water that reaches the tap. Clear the blockages using drain cleaning snakes and a high-pressure water hose. If these methods fail, it may be necessary to replace the water heater entirely or check with a Littleton water heater repair.
5. Low Water Pressure
Low water pressure can be due to a clogged pipe, a closed pipe valve, or a failing water pressure regulator. To fix it, locate the main water shut off valve and turn off the water supply. This can be located in the utility room or outside the house.
Once the water supply is shut off, locate the clog and clear it using a drain snake, plunger, or another tool. If the clog is difficult to reach, it may be necessary to contact a professional plumber to clear it.
Once the clog is cleared, open the main water supply valve and check the pressure. If it is still low, then it is likely that the problem is with the water pressure regulator, which you can replace. Check again for any clogs or blockages and remove them if found.
Solve These Common Plumbing Problems Today
Overall, plumbing problems are quite common; however, addressing them with the appropriate solutions can help you avoid costly repairs. By learning these five common plumbing issues and how to prevent and solve them, you can ensure your plumbing is running smoothly.
For additional help and support, contact a professional plumbing service.
For more information about home improvement, maintenance, and more, check out our blog!
